Product Description:
Titan3™ Nylon Syringe Filters – Thermo Fisher Scientific
An internal ring provides more strength to the housing which prevents leakage and bursting. Titan3 Syringe Filters are packed in re-usable rigid transparent and color-coded containers. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Titan3 Nylon Syringe Filter 1.5 µm, 30 mm, 100 Pk.
Syringe Filters – Glass, PTFE, PES, PP, Nylon, & More
We carry syringe filters made of nylon, glass fiber, polypropylene (PP), polyethersulfone (PES), PVDF, polytetrafluoroethylene (PTFE), cellulose acetate, and more. HPLC Syringe Filters available in two sizes: 13 mm and 30 mm; Two pore sizes: 0.2 µm and 0.45 µm; Glass Fiber syringe filters available in 1.2 and 0.7 µm
Bottom-of-the-Bottle™ Solvent Filters
Protect your HPLC system from contamination with Thermo Scientific™ Bottom-of-the-Bottle™ Solvent Filters. The flat design ensures efficient draw. They are made from 100% PEEK polymer and include two 10µm filters. A helium sparge port and frit are incorporated for optional use. Limited warranty period: Subject to all warranty requirements
Choice™ Polypropylene (PP) Syringe Filters
Choice™ Polypropylene (PP) Syringe Filters Catalog number: CH2225-PP Related applications: Chromatography Technical Support Customer Service Thermo Scientific™ Choice™ Polypropylene Syringe Filters are a good choice for filtration of biological samples, and for filtration of aggressive organic solutions.
Membrane filtration: A guide to choosing membranes | Cytiva
Aug 7, 2018 · Regenerated Cellulose (RC) Membrane. A versatile cellulose-based hydrophilic membrane that is resistant to a very large range of solvents, including aqueous solutions and organic solvents. Recommended for use in HPLC and protein recovery applications. DO USE: with most common solvents, including those used in HPLC.
High Quality Specialty Syringe Filters | I.W. Tremont
Pure virgin PP, verified by HPLC against U/L extractables. 13mm diameter syringe filter: Filter Ø: 13 mm Filtration area: 1.09 mm 2 Housing material: polypropylene Holdup volume: <20 µl Sample volume: <10 ml Maximum Operating Temperature: 130°C (Housing only, also dependent on membrane)
HPLC prep—which filter fits your chromatography sample best?
Jul 11, 2017 · Go syringeless in your HPLC prep If your samples are low particulate and relatively easy to filter, a syringeless filter option simplifies the HPLC prep and filtration process greatly. Using a standard syringe filter involves at least four and up to five individual components if you include the initial sample storage vial.
Capsules and Inline Filters | Fisher Scientific
Aqueous IFD from GE is a polypropylene housed in-line filter/degasser (IFD) with nylon membrane. It connects to an HPLC line and simultaneously filters and degasses during HPLC mobile phase preparation. Pore Size. 0.2 μm. Description. Aqueous IFD, 0.2 μm, 50 mm, nylon (10 pcs) Diameter (Metric) 50 mm. Housing Material.
Filter Validation Studies for Pharmaceutical QC – Factors
Three different concentrations of naproxen ranging from 244 ppm to 2.4 ppm were filtered through hydrophilic PTFE Millex ® syringe filters and filtrate was analyzed by HPLC. As can be seen in Figure 1, no analyte binding was observed for the high concentration of naproxen (244 ppm), even without any filter saturation (no discard volume).
Filtration Media Selection Guide
PP membranes are a good choice for filtration of HPLC samples when performing protein analysis by chromatography. In addition to being highly solvent resistant, these membranes are low non-specific adsorbing membranes, which results in maximum protein recovery for critical analysis.
Regenerated cellulose in HPLC filters | Cytiva
Regenerated cellulose in HPLC filters High-performance liquid chromatography (HPLC) is a versatile technique for chemical analysis that employs a range of different solvents depending on the application. HPLC benefits from filtration during sample preparation to remove particulates.
Reduce PFAS Background with the Aijiren PFC-Free HPLC
installed in the (U)HPLC pump in front of the autosampler and should not be used as a separation column. The new solvent lines in this kit are made of polypropylene (PP), which offers the same reduction of PFAS background, compared to PEEK, while improving the usability, due to the higher flexibility and transparency. The new and uniquely
Hplc-filter | Sigma-Aldrich
polypropylene housing regenerated cellulose membrane: Expand. Hide. WHA10463042: Exhaust air filter for HPLC bottle adapter S40, disposal. Compare Product No …
HPLC Filters, Solvent Tubing, Solvent Bottles & Caps | Aijiren
HPLC Solvent tubing are low pressure connections between the HPLC solvent filter used in Solvent bottles with caps and the HPLC instrument and further to the waste canisters. Our Stay Safe Cap portfolio help to minimize harmful solvent vapors evaporation into the air from Solvent bottles.
HPLC Filters and Frits – Biotech
The frit is incorporated into the body of a flat-bottom ferrule. Can filter at any point in your system where 1/16” or 1/8” OD tubing is used in a flat-bottom 1/4-28, M6 or 5/16-24 connection. Designed to seal and filter simultaneously. Eliminates traditional inline filters and reduce the number of additional connections in your system.